If somebody will email me a good scan of the RB-1 paperwork, and if John can send me the reverse-engineered schematic I'll combine them and make a web page and add it to the Com-Spec page on www.repeater-builder.com
Mike WA6ILQ At 02:47 PM 12/20/03 -0600, you wrote: >"skipp025" <[EMAIL PROTECTED]> wrote: >SNIP > > to supply me with diagram for the RB-1 I > > obtained second hand. Might be time to dig > > that diagram out and make it available. > >Be aware, about 10 years ago I did some modifications >to the RB-1 board (to meet some special needs I had >for the timing & reverse encode) and I discovered that >there were a few components on that board which were not >in the factory supplied schematic. I called engineering at >Commspec & they confirmed there were parts missing in the >printed schematic. > > > > > > > >Yahoo! Groups Links > >To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > >To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > >Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/