Oops, that was supposed to have been a private message to John. Neil
Neil McKie wrote: > > Hello John, > > I remember the tool problem ... you *had* to be very careful no > matter what you did. > > So sorry to read about the babys death. That is difficult for anyone. > > Are you still married to Noelle? I that you were divorced way back. > > Neil > > JOHN MACKEY wrote: > > > > Neil McKie <[EMAIL PROTECTED]> wrote: > > > > that capacitor. If you happen to accidentially short across > > > > the capacitor plates with your tuning tool, you would blow the > > > > varactor diode. > > > > > > Sounds like you had the wrong Motorola tuning tool ... :( > > > > The problem was that what motorola directed as the correct tuning > > tool was usually not strong enough to do the job. So then you had > > to use a metal tipped tool & be very careful. > > > > http://www.siouxcityjournal.com/articles/2003/12/20/obituaries/local/6e63a3a2ea23577286256e02001eeb51.txt > > > > > > > > Yahoo! Groups Links > > > > To visit your group on the web, go to: > > http://groups.yahoo.com/group/Repeater-Builder/ > > > > To unsubscribe from this group, send an email to: > > [EMAIL PROTECTED] > > > > Your use of Yahoo! Groups is subject to: > > http://docs.yahoo.com/info/terms/ > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
