I just sent them to International Crystals and told them to make them for the new ham frequency. Never even thought about injection hi or low, and they came back from ICM and the repeater tuned right up. LJ
Original Message: ----------------- From: converbit2003 [EMAIL PROTECTED] Date: Fri, 26 Dec 2003 15:13:09 -0000 To: [email protected] Subject: [Repeater-Builder] Re: UHF MSR-2000 to Ham conversion Larry, I just bought one and it was on the 462 RX. Do you order crystals for low or high injection? Right now, the crystal is a low injection at 451 . Richard --- In [email protected], "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote: > We have lots of UHF MSR-2000 Repeaters that were originally on 465/460 MHz > that we moved to the UHF 440-450 MHz Ham Band. No "Conversion" is > necessary, just have the Channel Elements recrystalled and retune the radio > per the instructions in the MSR-2000 service manual. > LJ > > > Original Message: > ----------------- > From: Michael Singewald N1PLH [EMAIL PROTECTED] > Date: Fri, 05 Dec 2003 14:43:29 -0000 > To: [email protected] > Subject: [Repeater-Builder] UHF MSR-2000 to Ham conversion > > > I have seen the info on the repeater-builder site for VHF > conversions, but is there any info around on the UHF radio? > > It is rated 450-470 now and I am looking for 446.700 rx and 441.700 > tx. > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > -------------------------------------------------------------------- > mail2web - Check your email from the web at > http://mail2web.com/ . Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ . Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
