Thanks for the info and advice ,im working on getting a manual I have all the shield except for the front big ones i allways wonderd abought them now i know abought them too. you guys are so smart the # are c71rcb1146d,tcn1223a,tln1865a,tlb6854bpr,tlb8274a3,tlb1414c2 tx 48.140rx 48.520 so at least its a high split .do i need to change caps in rx too? IVE been to all the sites and studdied everthing i can I took the two units appart and i sure see a differance in filtering now! 0-NONE\EVERY LINE out of site out of mind i never would have known thanks. Im putting it on 52.00 rx 52.5 tx crystals from bomar So isolation is real important to me. I guss i need a coupl interface boards the ones on the other repeater have had too much mouse pee or somthing and they are in bad shape. but i might can just swap the filter packs on each board and cut the bridges but that is a lot of work so i guss im looking for some decent used ones before i get too crazey Aney one has some reasonbale let me know, or a manual other wise ill be at the soldering station for a while. If you know of aney other hidden stuff I might have a time with let me know but i think if i get the interface boards fixed ill be in good shape thans eric,mdm all who helping
Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
