it's called the r-8 control in the service manuel ----- Original Message ----- From: "Virden Clark Beckman" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, January 01, 2004 10:12 AM Subject: Re: [Repeater-Builder] GE Master II power output
> If you are looking at a station pa deck and the output filter is on your > right side - or a mobile and the fins are away from you, look to your > left near the horizontal centerline and into the left 1/3 section - you > should see a potentiometer on the pc board - this is the driver control > - mostly square blue colored flatly mounted, it should be the only > adjustment gizmo that isn't sealed with gooey waxy stuff - use a 50 ohm > load when adjusting power, cavities and other items can act as > distractions to the rf. Most mobile pa decks will live pretty well at > about 1/2 output power if kept ventilated by a fan of some sorts - > dropping the power below half can often make spurious emissions occur > causing havoc with the rx as well as other equipment onsite so be > cautious about lowering the output below the halfway point. > > Kevin wrote: > > > > I'm trying to find out how to reduce the output on a MSTR II > > Repeater. Currently its at 47w. > > > > TIA > > > > Kevin > > W0KCF > > > > -- > 73...Clark Beckman N8PZD > > Pursuant to U.S. Code, title 47, Chapter 5, Subchapter II, �227, > "Any and all nonsolicited commercial E-mail sent to this address > is subject to a download and archival fee of $500.00 U.S.". > E-mailing denotes acceptance of these terms. > > > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > > Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
