If you are talking about an axial body with screw
terminals at either end and a ground strap,
try Apex Electronics, Sun Valley, CA
Tel: 1818-767-7202
1323-875-1308 (could be a/c 213)
----- Original Message -----
From: "George Salzmann" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Friday, January 02, 2004 1:13 PM
Subject: [Repeater-Builder] WTB: Feed-through caps
> All,
>
> Happy, Merry and all that good stuff. I left my parts
> bag up at the site a couple weeks ago, and discovered
> that someone else wanted it more than I did.
> Unfortunately, I had all of my remaining feed-through
> capacitors in that bag. I quickly browsed through
> Newark and Mouser's catalogs and didn't see anything
> available.
>
> I'm assuming that someone, somewhere still makes them,
> or someone, somewhere, has a small stockpile of them.
> I need something rated to pass 14 VDC @ 8 amps. Anyone
> have any to part with, or know of a good source for
> these parts?
>
> George,
> AB0SF
>
>
>
> __________________________________
> Do you Yahoo!?
> Find out what made the Top Yahoo! Searches of 2003
> http://search.yahoo.com/top2003
>
>
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/Repeater-Builder/
>
> To unsubscribe from this group, send an email to:
> [EMAIL PROTECTED]
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
