Usually, a 110W transmitter running at 50w will draw MORE current & produce MORE heat than a similar model 50w transmitter running 50w. This usually is because of the additional transistors for the 100w model
Adi Linden <[EMAIL PROTECTED]> wrote: SNIP > BTW, the reason for choosing the 110W radio over the 50W radio is the size > of the heatsink. I had hoped that the 110W PA turned to 50-75% power would > have much better heat characteristics. Once I actually tuned the radio it > turned out that the reduction in PA output power does not mean an > equivalent reduction in current draw. Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
