On 6 Jan 2004 at 8:42, Virden Clark Beckman wrote: well. With walky talky power typically around 5 > watts this can be done with 4 cavities instead of the 6 or 7 needed > for higher power, for the 600kc ham vhf band split this each of these > could be made from 3 3lb coffee cans
ok this stament is not 100% true I run a repeater with 60 watts output and I only run 4 Cans. wth the 4 Sinclair cans I got over 90db of iso. and to boot if I really wanted to get them tighter thay will do a 500 KC split to boot so instead of going through the hassle of make'n your own cans .. look for a sinclair hybrid duplexer .. you can find these units from cheap to free ... and little work will get then where you need them All I had to do it tune .. the rods and stubs and was bang on . Good luck Rick Szajkowski VA3 RZS Charlotte Darby VA3 CMR Node Owners of IRLP Node 2120 Lakefield Ont Canada Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
