Unfortunately Joe, everything for this project is being donated for an OEM/RACES project to improve county coverage, specifically because of the lack of $$. I also wanted a Mastr II (got one donated but upon further inspection was missing a board and the PA was toast.) or a Micor but unfortunately no one was able to donate one. I myself would not want to go the ebay route because I wouldn't want to screw someone else over with the same POS problems I'm experiencing with it. Thanks.
Kevin -----Original Message----- From: mch [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 06, 2004 5:28 PM To: [email protected] Subject: Re: [[Repeater-Builder] Repeater Help] Well, if you really have the 'anatomy' to do this: Sell it on eBay, take the money, and buy something that will work much better. (such as a used MASTR II or Micor) Personally, I wouldn't do that to someone else, but it is your choice. Joe M. Kevin Bednar wrote: > > I kinda figured that John from what I've been told, but unfortunately > there is $0 to replace it with something else. I didn't pay for it so > that's why I was trying to get it working. Thanks. > > Kevin > > -----Original Message----- > From: JOHN MACKEY [mailto:[EMAIL PROTECTED] > Sent: Tuesday, January 06, 2004 5:23 PM > To: [email protected] > Subject: Re: [[Repeater-Builder] Repeater Help] > > You can best modify the spectrum by replacing the following components: > power supply, transmitter, receiver, controller. It should then > perform well if you used good replacement parts. > > "kbednar99" <[EMAIL PROTECTED]> wrote: > > > Ok, at the risk of being flamed I am gonna' ask this question anyway. > > ;) I have inherited a Spectrum Communications SCR-4000 repeater. > > Receive seems to work fine but the TX freq drifts after a few > > minutes no matter how many times I reset it. It has the TCXO option > > in it but it doesnt seem to matter. Any Ideas on what might be causing this? > > Spectrum has been LESS than helpful, other than to say "we > > discontinued it over 10 years ago and can't help you" and "we can > > sell you a manual if you want though!". Thats great. Also, does > > anyone know what mods are needed to run this unit with an outboard > > controller, as the Spectrum one sucks. Any and all help is GREATLY appreciated! > > > > Kevin > > K2KMB > > > > > > > > > > > > > > Yahoo! Groups Links > > > > To visit your group on the web, go to: > > http://groups.yahoo.com/group/Repeater-Builder/ > > > > To unsubscribe from this group, send an email to: > > [EMAIL PROTECTED] > > > > Your use of Yahoo! Groups is subject to: > > http://docs.yahoo.com/info/terms/ > > > > > > > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
