Kevin, What parts do you need for your MASTR II? Jeff
At 06:52 PM 1/6/2004, you wrote: >Mastr II PA's should be easy to rebuild?? A few new transistors, etc. and >some TLC and that would work better than any ham grade stuff. > >unless of course it is lightning toast. > >James > >Kevin Bednar wrote: >> >>Unfortunately Joe, everything for this project is being donated for an >>OEM/RACES project to improve county coverage, specifically because of the >>lack of $$. I also wanted a Mastr II (got one donated but upon further >>inspection was missing a board and the PA was toast.) or a Micor but >>unfortunately no one was able to donate one. I myself would not want to go >>the ebay route because I wouldn't want to screw someone else over with the >>same POS problems I'm experiencing with it. Thanks. >> >>Kevin >> >>-----Original Message----- >>From: mch [<mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] >>Sent: Tuesday, January 06, 2004 5:28 PM >>To: <mailto:[email protected]>[email protected] >>Subject: Re: [[Repeater-Builder] Repeater Help] >> >> >>Well, if you really have the 'anatomy' to do this: Sell it on eBay, take the >>money, and buy something that will work much better. (such as a used MASTR >>II or Micor) >> >>Personally, I wouldn't do that to someone else, but it is your choice. >> >>Joe M. >> >>Kevin Bednar wrote: >> >>> >>>I kinda figured that John from what I've been told, but unfortunately >>>there is $0 to replace it with something else. I didn't pay for it so >>>that's why I was trying to get it working. Thanks. >>> >>>Kevin >>> >>>-----Original Message----- >>>From: JOHN MACKEY [<mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] >>>Sent: Tuesday, January 06, 2004 5:23 PM >>>To: >>><mailto:[email protected]>[email protected] >>>Subject: Re: [[Repeater-Builder] Repeater Help] >>> >>>You can best modify the spectrum by replacing the following components: >>>power supply, transmitter, receiver, controller. It should then >>>perform well if you used good replacement parts. >>> >>>"kbednar99" <mailto:[EMAIL PROTECTED]><[EMAIL PROTECTED]> wrote: >>> >>> >>>> >>>>Ok, at the risk of being flamed I am gonna' ask this question anyway. >>>>;) I have inherited a Spectrum Communications SCR-4000 repeater. >>>>Receive seems to work fine but the TX freq drifts after a few >>>>minutes no matter how many times I reset it. It has the TCXO option >>>>in it but it doesnt seem to matter. Any Ideas on what might be causing >>>> >> >>this? >> >>>> >>>>Spectrum has been LESS than helpful, other than to say "we >>>>discontinued it over 10 years ago and can't help you" and "we can >>>>sell you a manual if you want though!". Thats great. Also, does >>>>anyone know what mods are needed to run this unit with an outboard >>>>controller, as the Spectrum one sucks. Any and all help is GREATLY >>>> >> >>appreciated! >> >>>> >>>>Kevin >>>>K2KMB >>>> >>>> >>>> >>>> >>>> >>>> >>>>Yahoo! Groups Links >>>> >>>>To visit your group on the web, go to: >>>> >>>><http://groups.yahoo.com/group/Repeater-Builder/>http://groups.yahoo.com/group/Repeater-Builder/ >>>> >>>>To unsubscribe from this group, send an email to: >>>> >>>><mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED] >>>> >>>>Your use of Yahoo! Groups is subject to: >>>> <http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/ >>>> >>>> >>>> >>>> >>> >>> >>> >>>Yahoo! Groups Links >>> >>>To visit your group on the web, go to: >>> >>><http://groups.yahoo.com/group/Repeater-Builder/>http://groups.yahoo.com/group/Repeater-Builder/ >>> >>>To unsubscribe from this group, send an email to: >>> >>><mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED] >>> >>>Your use of Yahoo! Groups is subject to: >>> <http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/ >>> >>> >>> >>>Yahoo! Groups Links >>> >>>To visit your group on the web, go to: >>> >>><http://groups.yahoo.com/group/Repeater-Builder/>http://groups.yahoo.com/group/Repeater-Builder/ >>> >>>To unsubscribe from this group, send an email to: >>> >>><mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED] >>> >>>Your use of Yahoo! Groups is subject to: >>> <http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/ >>> >> >> >> >> >> >> >>Yahoo! Groups Links >> >>To visit your group on the web, go to: >> >><http://groups.yahoo.com/group/Repeater-Builder/>http://groups.yahoo.com/group/Repeater-Builder/ >> >>To unsubscribe from this group, send an email to: >> >><mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED] >> >>Your use of Yahoo! Groups is subject to: >> <http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/ >> >> >> >> >> >> >> >> >>Yahoo! Groups Links >> >>To visit your group on the web, go to: >> >><http://groups.yahoo.com/group/Repeater-Builder/>http://groups.yahoo.com/group/Repeater-Builder/ >> >>To unsubscribe from this group, send an email to: >> >><mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED] >> >>Your use of Yahoo! Groups is subject to: >> <http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/ >> >> >> >> > > > > > > > > >---------- >Yahoo! Groups Links > * To visit your group on the web, go to: > * > <http://groups.yahoo.com/group/Repeater-Builder/>http://groups.yahoo.com/group/Repeater-Builder/ > > > * > * To unsubscribe from this group, send an email to: > * > <mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED] > > * > * Your use of Yahoo! Groups is subject to the > <http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service. Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
