ive tried rubber bands next to the slug......works well ! stephanie ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Wednesday, January 07, 2004 11:58 PM Subject: Re: [Repeater-Builder] Broken/ stuck slugs - was Fiberglass rod
> The soap on the powdered Iron slug is a good idea. What heppens if you heat > the soda straw too much? Does it unravel? My problem is the opposite. MastrII > soda straw type slugs have the tendency to slip. You crank and crank and they > stay put or even slide back down a little, thinking you made an adjustment > but you really didn't. I have taken some pvc insulation off #28 wire and tried > #40 Teflon sleeving to run alongside the slug with mixed results. Anybody have > a suggestion on this problem? > Gary K2UQ > > > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > > > Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/