Yes im trying to tap out. Im only using it as a receive. I need discriminator and a cos signal that will only work on pl. I found a spot, on the board that will swing low to high but it would do it with and without pl. I you can help my phone is 719-999-1436 email [EMAIL PROTECTED] 73
>>> [EMAIL PROTECTED] 01/07/04 10:02PM >>> Hi Richard, Are you using the option cable kit, or just trying to tap into the radio somewhere? I stock the option cable kits for the tk-840, 780 and 880 and can scan the pin out for it if you want that information. skipp PS, I've got your CSI 32 information and will be sending it in my next outbound email. Watch your email box. > "Richard Velez" <[EMAIL PROTECTED]> wrote: > > Anyone know where to pull a cos line out of this radio?? Only when PL is detected. Thanks > Rich/N2ROW Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
