Thanks, I'll let him know. Jeff DePolo WN3A wrote: > > If it's an Advanced Controller, you have to flip a dip switch in order to > change channel frequency settings if memory serves. I don't have the manual > here and it's been a few years since I set one up; I'm sure somebody else > here will give you the details. > > --- Jeff > --------- > Jeff DePolo WN3A > Broadcast and Communications Consultant > > > -----Original Message----- > > From: Larry Williams [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, January 14, 2004 11:32 AM > > To: [email protected] > > Subject: [Repeater-Builder] Purc 5000 programming?? > > > > > > Hi, I have acquired a purc 5000 with the enhanced drawer that > > is programmable (supposedly without having to reprogram the > > eprom) from th e front panel of the unit. A friend is trying > > to program it and so far when he puts the new freq in, it > > seems to take, but when you go back in, it's still on the old > > freq. Someone suggested to us that the actual operating freq > > could only be changed by motorola. Anyone know for sure? I > > can provide all the unit numbers you might need. > > > > Thanks in advance > > Larry Williams > > KE4PCZ > > > > > > > > > > > > Yahoo! Groups Links > > > > To visit your group on the web, go to: > > http://groups.yahoo.com/group/Repeater-> Builder/ > > > > To > > unsubscribe from this group, send an email to: > > [EMAIL PROTECTED] > > > > Your use of Yahoo! Groups is subject to: > > http://docs.yahoo.com/info/terms/ > > > > > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/
Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
