Typically DPL/DCG is set for 500-750 hz deviation. Most commercial radios, if they are setup for decode, will notch the passband of the DPL/DCG. If the DPL deviation is set too high, then there may be of the DPL passing through.
Bryan N3ST -----Original Message----- From: Gary Bargholz [mailto:[EMAIL PROTECTED] Sent: Sunday, January 18, 2004 10:47 AM To: [email protected] Subject: [Repeater-Builder] DPL Hello group, first post. Joined and looked through the archives for info on DPL. Anybody know the proper spec to set the level of DPL? Using an external DPL encoder. Also, any ideas on an audio notch, or filter to get rid of a little DPL flutter still getting through after decode? Using Motorola CDM750 to receive. Thanks, Gary, N9UUR Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
