thanks micheal i have chapter 5 in my manual but it doesn't have information on the test points on each card and the settings for the adjustments Thank you Ian Wells Kerinvale Comaudio mail service 1017, Biloela,4715. www.kerinvalecomaudio.com.au [EMAIL PROTECTED] ----- Original Message ----- From: "Micheal Salem" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, January 23, 2004 12:41 AM Subject: Re: [Repeater-Builder] wavetek ct systems 3000b
> Ian and others: > > I have checked my files at home and I have Chapter 5 of the > Wavetek 3000B manual (maintenance) in zipped format and it > is about 1.4 Mb. My recollection is that it is about > 15 pages or so and I had received it from somebody who > was kind enough to send it to me. > > If anybody would like it, let me know. If somebody has > a site to post it, I would prefer to send it to them. > > I had also scanned the entire Manual including the > schematics into Paperport. I had to scan the schematics > in two parts and assemble them, so there is some discontinuity > in the drawings, although I don't think it is that significant. > > Although scanned to 11 x 17, when printed to 8.5 x 11, they > are small, but should still be usable. I don't remember if I have > completely assembled the entire manual schematic set. If they > were printed in Paperport, and you had a large format printer, > they would print best in their native size. > > I had planned to convert these to Acrobat, but don't remember > whether I did or not. These files are fairly large and e-mail > would not do. > > There are some anomalies in the 3000B stemming from the > mixing scheme. If you look at the output with a scope, you > will see that it does not produce a pure sine wave, but that > may be common with a lot of service monitors. Still, the > signal is usable. > > As for the bad transformer, that is one reason I bought two of > these (that and the good price that was offered). > > Transformers can be a problem. A friend of mine gave me one > of the separate signal generators and it blows fuses from an > apparent bad transformer, or it could be something else. > I took it thinking I would have a spare scope and other > parts (I got a manual with it), but the last time I > remember comparing the books, I think they were different tubes, > so no dice. > > Micheal Salem N5MS > Norman, Oklahoma > > > ian wells wrote: > > hi michael > > thanks to everyone comeing back on this issue > > I have the service manual on file pdf but i haven't any information on the > > calibration part > > thanks ian wells > > ----- Original Message ----- > > From: "Micheal Salem" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Thursday, January 22, 2004 7:58 AM > > Subject: Re: [Repeater-Builder] wavetek ct systems 3000b > > > > > > > >>Ken: > >> > >>If it will help, I have a manual for the CT3000B which includes > >>some schematics and the extra chapter (Chapter 5) which contains > >>some service and calibration information. > >> > >>Micheal Salem > >> > >> > >> > >> > >> > >>Ken Arck wrote: > >> > >>>At 12:49 PM 1/21/2004 -0600, you wrote: > >>> > >>> > >>>>I have two Wavetek CT3000B service monitors. One works OK, the > >>>>other has a problem in the scope. I would like this fellow's > >>>>name to see what it would cost to bring one or both up to snuff. > >>> > >>> > >>><---If anyone gets his contact info, I'd like it too. One of my level > >>>switches "slipped" a notch, so it actually displays 1 more than it > >> > > should > > > >>>for a digit > >>> > >>>Ken > >> > >>-------------------------------------------------------------------------- > > > > ---- > > > >>>President and CTO - Arcom Communications > >>>Makers of state-of-the-art repeater controllers > >>>and accessories. > >>>http://www.ah6le.net/arcom/index.html > >>>Our new Repeater Audio Delay (RAD) board is now shipping! > >>>Compatible with many controllers! > >>>AH6LE/R - IRLP Node 3000 > >>>http://www.irlp.net > >>> > >> > >> > >> > >> > >> > >> > >>Yahoo! Groups Links > >> > >>To visit your group on the web, go to: > >> http://groups.yahoo.com/group/Repeater-Builder/ > >> > >>To unsubscribe from this group, send an email to: > >> [EMAIL PROTECTED] > >> > >>Your use of Yahoo! Groups is subject to: > >> http://docs.yahoo.com/info/terms/ > >> > >> > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > To visit your group on the web, go to: > > http://groups.yahoo.com/group/Repeater-Builder/ > > > > To unsubscribe from this group, send an email to: > > [EMAIL PROTECTED] > > > > Your use of Yahoo! Groups is subject to: > > http://docs.yahoo.com/info/terms/ > > > > > > > > > > > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > > Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
