The zmatcher matches the reactive impedance to the transmitter, not the resistive load - any cable changes or anything will affect this reactance.
Ralph Mowery wrote: > > > Couldn't agree with you more. The important point is that you can't > insert > > an SWR meter or wattmeter in the line to make adjustments and then take it > > out. The GE Z-match gives you the directional coupler which gives you a > > Why can't you take the swr meter out ? The Z-matcher is after the place > where the swr meter is. > The purpose of the matcher is for minimum swr or reflected power, the same > as the internal matcher of the GE repeater. > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ -- 73...Clark Beckman N8PZD Pursuant to U.S. Code, title 47, Chapter 5, Subchapter II, ß227, "Any and all nonsolicited commercial E-mail sent to this address is subject to a download and archival fee of $500.00 U.S.". E-mailing denotes acceptance of these terms. Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
