Our club has a HF remote base controlled from 70 cm. The beam rotor is a Yaesu G1000S/SDX with a GS-23 RS232 interface. The problem is a -50 Deg error at 360 Deg. There is no error at 0 Deg.
There are two adjustment pots on the board but their functions are not identified.
Does anyone have a manual or a calibration procedure?
Gran K6RIF
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
