The COR output on an M120 is an open collector thru a transistor to ground, therefore you will not see any voltage change unless you supply a +5 or +12 voltage through a 10K or 100K to this pin. Then when the collector switches to ground it will pull down the voltage on the end of the resistor to ground. The collector is protected by a 27 volt zener.
Art - KC7GF Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/