Info Sheet: http://www.repeater-builder.com/pdf/wp678.pdf
Several other links of interest may be found at http://www.repeater-builder.com/rbtip/ant-sys-index.html. Tuning can be done fairly easy with a signal generator, a receiver, a few cables, pads and 50-Ohm terminations. BpBr tuning is pretty straight-forward. Just about any instruction sheet for a similar device should do. So, if you can't find one specifically for the WP-678, don't panic. 73, Steve, AA5SG ----- Original Message ----- From: "n2kpk" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, February 03, 2004 6:56 PM Subject: [Repeater-Builder] Tuning a WP-678 uhf Duplexer > Does anyone have the tuning instructions for a wp-678. > Would appreciate any help. > > Jay n2kpk > > > > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > > > Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
