Sometimes component tolerances may all go the wrong way, and will limit a unit's ability to tune up outside the specified band. If you look closely, I think you will find that the MASTR Exec II and the MASTR II multiplier exciters and receivers are very similar in their basic design.
73, Steve ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, March 11, 2004 10:06 PM Subject: Re: [Repeater-Builder] Need lowband Exec II xciter align instructions > See: > > http://www.qsl.net/n1gnn/alignmen.htm > > You will need to replace some parts to get it to work. I have one working on > 53.01 tx but it was a pain, required some cap changes and still didn't want to > tune up too well. If you can get your hands on a low band mastr II they seem > to go up there without any problem. > > RG > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
