Well i got good news and bad new s ,,
#1 the good
the crystals came today $60 for the pair , the controller came ups 3
days ago , MCC RC-1000V nice unit , no manuals shipped from the old
club
so i built the TX cable RCA to N male , and volia it works
..... :)
now the bad
8156 doesnt have the purple glow , checking tx powe a massive 3/4
watt output , peaked and tuned it today took 2 hrs by manual and DC
volt meter , both digital and an old 1945 military analog meter , got a
wopping 2 watts out off the exciter or atleast i think its exciter power
, its a ET-60 tx strip that is single channel , no icoms ( thanks god
im not ready for multi channel ) al lot of the tuning process said look
for 20 volts i only found max of 19 , and the rest was look for
0.6 , some was 0.88 nd the rest were 0.35 - 0.49 volt , im beginning
tothink bad caps and resistors , but on with that i removed the 8156
and found corroded silver , so some polish and pipe cleaner , done ,
still 2 watts , soo i beg of theeee , the great M pro techs , whats
up where do i look next !!!!!
Russ
N3TIH
444.450 canton pa , first 440 !
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
