are you sure you need xtals ??
all mine are programable
( what I need is the codes for the UHF's and programming sheets)
here are the pin outs on the back
Hope this helps
P911 Description
1 GROUND (A-)
2 PTT - TX (Active LOW)
3 MIC SHIELD GROUND
4 MICROPHONE INPUT HI
5 MICROPHONE INPUT HI
6 RESET (Active LOW)
7 CHANNEL SELECT
8 (I converted this pin to +12V for mic power)
Phoenix Power Connector (P910)
P910 Description
1 TO IGNITION SWITCH + (2A Fused)
2 RX MUTE (Active LOW)
3 EXTERNAL SPEAKER HI
4 FILTERED VOL/SQ HI
5 SPARE ((Channel A/B Select)
6 GROUND
7 EXTERNAL SPEAKER LOW
8 GROUND
9 CG DISABLE (Active LOW)
10 INTERNAL SPEAKER HI
11 +13.5 VDC POWER INPUT (15A Fused)
On 23 Mar 2004 at 18:28, Russell Filling wrote:
> hi all
>
> ok im looking for the pinouts on the back of the phoenix radio ,
> i know its gonna need crystals 2 , does anyone know off the top
> of their head what the multiplier factor is ? , im trying to mate
> a shure bros. 885t DTMF mic to it
>
> Russ
> N3TIH
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
Rick Szajkowski VA3 RZS
Charlotte Darby VA3 CMR
Node Owners of IRLP Node 2120
Lakefield Ont Canada
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
