Hello Steve Yes I did change the PA board with one from a identical radio. It just wont come up to power now. Their must be a programing procedure that needs to be done. And if I can program "COR" at pin 8, I will be set. Thanks: Scott
--- [EMAIL PROTECTED] wrote: > Scott > > The accessory pins on the 16 pin verson maxtrac can > be reprogrammed so you > can pick > up cor off of pin 8 > > as for the one with the bad pa, are you sure you > swapped in an identical pa > board? > and yes you may be able to go into the service > section of the software and > "try" > and correct the problem, if not and the receiver is > working just fine > why not use that one for your receive radio > > Steve > __________________________________ Do you Yahoo!? Yahoo! Tax Center - File online by April 15th http://taxes.yahoo.com/filing.html Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
