Re: [Repeater-Builder] TKR-820 - Adding an External Controller..

[XE2SI]

Hi Steve, hope this helps..........: Pin                          Function   1                            Hook  ( must be grounded in order to PTT ) 2                            Line ground 3                            Encode tone input 4                            Discriminator 5                            Line audio ( Takeover switch must be in out position ) 6                            Speaker ground 7                             13.6 vdc 1.0 amps max out 8                             PTT 9                             Speaker in 10                           Rx audio squelched 11                           Ground 12                           Speaker out 13                           TOR ( Low when proper PL decode ) 14                           Special use ( for channel change ) 15                                "           "                    "   Juan,73 ----- Mensaje original ----- De: Steve Grantham Para: Repeater-Builder@yahoogroups.com Enviado: Wednesday, April 14, 2004 2:20 PM Asunto: [Repeater-Builder] TKR-820 - Adding an External Controller.. Does anyone have the pin-outs for the accessory jack on the TKR-820 for adding an external controller?  Any hookup tips? Thanks! Steve Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/   To unsubscribe from this group, send an email to: [EMAIL PROTECTED]   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.