I just came up with an extra station control board, too, so I plan to modify mine as per Kevin's article. Larry K7LJ
Original Message: ----------------- From: Jim Cicirello [EMAIL PROTECTED] Date: Sun, 18 Apr 2004 15:33:17 -0400 To: [email protected] Subject: Re: [Repeater-Builder] Modifying a Motorola Micor Station Control Module Hi Eric: The ink stamped number is: TLN4635B Thanks JIM ----- Original Message ----- From: "Eric Lemmon" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Sunday, April 18, 2004 2:24 PM Subject: Re: [Repeater-Builder] Modifying a Motorola Micor Station Control Module > Jim, > > What is the ink-stamped part number of the SCM board? > > 73, Eric Lemmon WB6FLY > > Jim Cicirello wrote: > > > > Hello to Kevin and the Group: > > > > Modifications to the MICOR Base to repeater operation is going well > > thanks to your help. > > I am now going to modify the Station Control Module as described by > > removing Q10 and Q15. I find NO schematics on this module in any of > > my Micor Manuals.Can you point me to a site that shows Q10 Q15 Etc? > > If not available on line a scanned copy by someone would be greatly > > appreciated. > > Thanks in advance. > > > > JIM KA2AJH > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ . Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
