As long as you don't experience mixing troubles it will work, the method
more durable is building a mutli-coupler for the bandwidth you need -
could be done with 7/8 hardline using taps at the electrical 1/4
wavelength for each rx port, the cavity filter will be next in line -
must be kept straight. You will have to experiment if you are trying to
mix 145 and 15x as losses begin to show on the wider bandwidth that are
never recovered, adding some form of pre-amp here also carries in noise
from other signals that can easily overload the rx of all ports.
INECA wrote:
>
> Hello All:
> Questions:
> Does some problem exist if I share oneself RX antenna for two
> repeaters with a "Tee?"
> I thank any information in this respect.
>
> Regards
> Ucaima
>
--
73...Clark Beckman N8PZD
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
