At 11:49 PM 4/21/2004 -0000, you wrote: >Having trouble with the receiver being to low ,so without the proper >test equipment available to me ,I'm going to tune this the old >fashion way . With an HT in the field by ear . My problem is I >don't know which board is the main board for tuning the receive. I'm >thinking its the FM 455. Question is there anyone in this group >familiar with this receiver and tune up procedures ? VHF Engineering >Repeater
<--Well, since you're stuck with the thing... the FM455 is the IF board. The RF144 is the front end/1st local oscillator and 1st mixer board. If by "too low" you mean it's off frequency, it should be obvious which board contains the channel xtal and its associated trimmer cap, no? Ken ------------------------------------------------------------------------------ President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html Be sure to see our products at this year's Dayton Hamvention! Repeater Builders spaces 707 through 710 AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
