At 08:08 PM 5/8/2004 -0000, you wrote: >Can you not tell the RC210 to "send out" a line of dtmf's? Set this >up in a macro?
<---Yep, you sure can. The 210 has 20 DTMF memories, each of which can store 10 digits. Each memory can be called from a Command Macro. I'm not familiar with the sequence of events that need to take place when you send a command to the RC100 in order to do what you want but it doesn't accept some DTMF digit as a "command terminator", to force command execution (as in the case of a 'stuck' COS)? Currently in an RC210 Command Macro, there is no way to actually drop the PTT line on a port. Ken That way you could have "channels" that the IC3AT >would just dial up to. I also wonder in the same macro if you could >get it to "pause" or "drop" the tx then re-key and send another >string of dtmf's? I haven't played with it yet...but I change the >dip switches on the ts32 (for the 3at) with the CS-1688. Not sure >yet if it couldn't be incoorperated in to the one line of dtmf's yet >or not. If that would work....that would be cool :-) >Thanks and 73, >Robert > > > > > > > >Yahoo! Groups Links > > > > > ------------------------------------------------------------------------------ President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html Be sure to see our products at this year's Dayton Hamvention! Repeater Builders spaces 707 through 710 AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
