On the order of this question, cna two units be used, one for transmit and one for receive to make a repeater through a seperate controller.
Mathew ----- Original Message ----- From: "Jim B." <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, May 10, 2004 1:15 PM Subject: Re: [Repeater-Builder] Syntor X as a repeater? > ki0ky wrote: > > > Can a Syntor X, Id No. T73VBK7004BK, be converted to a 2M ham repeater. If > > so, how difficult is the conversion? > > > > 73, > > > > Steve KI0KY > > > > No. There is only one synthesizer, and it cannot generate tx and rx at > the same time. > This will be true for virtually all synthesized radios, unless it was > specifically made as a repeater from the factory. > > -- > Jim Barbour > WD8CHL > > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
