That was a typo....I knew that and I have both the 10 and the 20...just too early on a Sunday Morning....DOH!
Gregg R. Lengling, W9DHI, Retired Administrator http://www.milwaukeehdtv.org K2/100 S#3075 KX1 S# 57 Member: ARRL, RSGB, RCA and ORC -----Original Message----- From: Andy Brinkley [mailto:[EMAIL PROTECTED] Sent: Sunday, May 16, 2004 7:41 AM To: [email protected] Subject: RE: [Repeater-Builder] Kenwood TKR-820 Greg - The 20 series requires the KPT-20 or KPT-50. The KPT-10 is the prom burner for the 01 series radios. Andy -------------------------------------------------------------- NC Certified Firefighter III / Instructor II / EMT-A FCC Licensed Technician / Amateur Call NC4AB / Echolink Node 5761 http://www.brinkleyelectronics.com > -----Original Message----- > From: Gregg Lengling [mailto:[EMAIL PROTECTED] > Sent: Sunday, May 16, 2004 8:42 AM > To: [email protected] > Subject: RE: [Repeater-Builder] Kenwood TKR-820 > > > It requires either the KPT10 or KPT50 programmer. The 10 is > a standalone > unit (I have one) and the 50 is a riblike device that also > can use a laptop. > > > Gregg R. Lengling, W9DHI, Retired > Administrator http://www.milwaukeehdtv.org > K2/100 S#3075 KX1 S# 57 > Member: ARRL, RSGB, RCA and ORC > Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
