Hi Dennis, just wanted to ask if you had tested this RBI-1 interface out before selling it. Only reason I ask, is I hooked it up and am not getting it to do anything, so I am not sure if the unit is functional or I am doing something wrong. I turned on my Link 3 Port, which this is on an RLC2 controller. When I hooked the radio up to the box, hit the reset on the back, it did make the radio go through both the 440 and 2 meter, which is a Kenwood TM-731 rig. Everything seems to be hooked up in order. Any hints. Thanks.
Mathew ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, May 07, 2004 8:09 AM Subject: [Repeater-Builder] FS: Dulpexer and RBI-1 > I have for sale a set of the Decibel Products duplexers, model DB-4003. > The DB-4003 are band pass only cavities. I also have the companion notch > cans. There are a total of four (4) band pass and three (3) notch cans. > Please email off list for the spec sheets in jpeg format if you are > interested. Priced at $450.00 delivered to Dayton Hamfest, or buyer pays > shipping from Alabama. > > Also, a Doug Hall Electronics RBI-1 remote base interface with cable for > one Kenwood radio. Manual available on line at http://www.dheco.com/. > Priced at $175.00 delivered to Dayton Hamfest, or buyer pays shipping from > Alabama. > > Email [EMAIL PROTECTED] > > Thanks to Kevin for the bandwidth. > > Dennis/W4TCL > > > -------------------------------------------------------------------- > mail2web - Check your email from the web at > http://mail2web.com/ . > > > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
