Hi, all --
I am on the technical committee of an amateur repeater club. A club in the next
county has approached us to ask about sharing one of our 2m receive sites with
them. It's a commercial site and we are there at the pleasure of the owner, who
is willing to accommodate them and thinks that there are no bad mixes.
The other club has asked to share our 2m receive antenna and feedline, and has
volunteered to install whatever equipment we specify so that our site's
performance is not degraded.
While this sounds doable to me, I am more of a digital guy than an RF guy. What
should we install in order to do this "the right way" without degrading our
site's performance?
Our system transmits on 146.88 MHz and receives on 146.28.
We use a Motorola receiver (I think it's a Micor).
The other club's system transmits on 147.345 and receives on 147.945.
Both have links in the 440 band.
Neither system will transmit on 2m from this site.
Any advice or recommendations as to architecture, equipment that works (or
doesn't work!), or points to be included in a Memorandum of Understanding,
would be appreciated.
Regards,
Bob Koblish
[EMAIL PROTECTED]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
