Yes, this will tune into the ham band without serious mods - a word of
caution before you continue running the ep38, check the integrity of the
bleeder resistors that are on each high voltage cap - if any doubt
replace them all before someone gets hurt. And when you tune the exciter
you can pull the driver tube and continue working for 10-15 second
intervals without it, when it sees the swr it causes a lot of heating
and can fail quickly, once you get the exciter making power on the test
set/voltmeter drop the tube back in and tune the final and away you go,
they make 100 watts all day and nite low band just keep the fan running.
And if you go split site with another ep38 uhf the rx/tx trays switch
easily or look for an ep39 which is the remote rx tray holder and figure
another way to send back with a uhf walky on low power.
--
73...Clark Beckman N8PZD
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
