well you must of been lucky as mine are epoxied over so that I can't even get a allen key in there
----- Original Message ----- From: "Ken Arck" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, June 03, 2004 10:24 PM Subject: Re: [Repeater-Builder] help I need > At 10:09 PM 6/3/2004 -0400, you wrote: > >will a vhf one work on a uhf repeater? > > <----No. That filter is in the output of the tripler. Therefore it needs to > be UHF. > > As for the epoxied slugs, I used some acetone and CAREFULLY worked them > back and forth with a high quality allen wrench. A little patience and > careful work allowed me to free every single one. > > Good luck! > > Ken > -------------------------------------------------------------------------- ---- > President and CTO - Arcom Communications > Makers of state-of-the-art repeater controllers and accessories. > http://www.ah6le.net/arcom/index.html > AH6LE/R - IRLP Node 3000 > http://www.irlp.net > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
