You can buy in-line RF fuse holders; maybe the mod was using a chassis-mount
RF fuse holder? I have one that is a regular (not chassis mount) BNC male
to BNC female; I think it says Anritsu on it but was probably OEM'ed by
someone else. JFW and Alan Industries also make RF fuse holders. I don't
know how the BNC connector mounts on a 1200, and forget how it mounts on my
1500, but maybe you can find an in-line chassis mount one that would fit.
Do some web searches for Alan Industries or JFW and you might find what you
need.
You can get external ones like I have from HP, Anrtisu, Tek, etc.. Might be
an easier solution than trying to fit one inside the box.
--- Jeff
--------------------------------------------
Jeff DePolo WN3A - [EMAIL PROTECTED]
Broadcast and Communications Consultant
> -----Original Message-----
> From: Chuk Gleason [mailto:[EMAIL PROTECTED]
> Sent: Thursday, June 03, 2004 5:40 PM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]; [email protected]
> Subject: [Repeater-Builder] IFR 1200
>
>
> Regarding IFR 1200, and maybe the COM 120;
>
> Several years ago I heard about "someone" who had developed a
> pico-fuse holder antenna input for the 1200; kinda like is in
> the M. R2600
> monitor (little 1/8 or even 1/16 amp green picofuse behind
> the BNC Female connector.
>
> Anyone else ever hear about this? Have info? Can share???
>
> Chuk Gleason
> Cary, NC
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
