On all the units that I have, they either respond to the 1050 Hz tone,
or SAME, but not both. The SAME units ONLY respond to SAME codes. The
tone units only respond to tone.
This won't help you, but there is a code to program the SAME receivers
with so they will respond to ANY alert, but they still use the SAME data
- they just ignore the FIPS (area) code.
To guess your next question, I am not aware
of any SMs that generate SAME coding.
Joe M.
Mathew Quaife wrote:
>
> Thanks Mike, if the same codes were not put into the weather radio, it
> should not require the same codes to be sent is what I am thinking. I sent
> a 1050 Hz tone from the service monitor, that did not open the receiver.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
