Me too, sometimes I need to open the case and read what is printed on the crystal case itself. Other times, I look at the produced signal from that Channel Element on the spectrum analyzer and calculate what frequency it is on.
Neil - WA6KLA N9WYS wrote: > > I have seen where elements are sent out for re-crystalling > (different freq) and come back with a stick-on label showing the > new freq. Maybe the labels came off, revealing a freq that is no > longer in the element? > (I've actually had this happen to me before.) > > Mark - N9WYS > > -----Original Message----- > From: Neil McKie [mailto:[EMAIL PROTECTED] > Sent: Friday, June 11, 2004 2:30 PM > To: [email protected] > Subject: Re: [Repeater-Builder] Micor 4 Channel Help Needed > > Perhaps ... > > 1) the Channel Elements are on a frequency that the radio is not > tuned to or ... > > 2) there are no crystals in those Channel Elements ... > > 3) the ground return for the Channel Elements selector switch in > the control head is not connected to ground - anywhere. > > Neil > > Mathew Quaife wrote: > > > > Yes, they are in the 163 Mhz range. When I press the mic button > > the radio keys up, just no power output. > > > > Mathew > > > > ----- Original Message ----- > > From: "Neil McKie" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Friday, June 11, 2004 10:44 AM > > Subject: Re: [Repeater-Builder] Micor 4 Channel Help Needed > > > > > > > > Are there any Channel Elements in it? > > > > > > Neil > > > > > > w9mwq wrote: > > > > > > > > I just got a 4 channel micor radio, T73RTN3180B radio, actually > two > > > > radio's and one set on control heads. The radio comes on, has > good > > > > volume, and squelch works, but there is no receiver sensitivity, > nor > > > > power ouput. Both radios do the exact same thing. I'm thinking > > > > control head, but everything seems to be hooked up. > > > > > > > > Mathew > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
