There's an article on that at www.repeater-builder.com on the Motorola page.
I've heard a few stories third hand - unconfirmed - that getting the PL decode to work properly is a moire difficult than anything else (at least one version of the firmware had bugs there), and that adding a TS32 or TS64 decoder is easier than trying to upgrade / change the firmware. Mike WA6ILQ At 01:22 AM 6/15/04 +0000, you wrote: >--- In [email protected], "Richard Sharp, KQ4KX" ><[EMAIL PROTECTED]> wrote: > >"Anyone know the best way to interface an external controller to a >MSF5000 digital repeater? > >Richard >kq4kx" >__________________________________________________ >_____________________ > >The easy way is to use the 600 ohm transmit and receive wirelines >which are available on the side of the station. The station option >connector also has a programmable input which can be configured as PTT >and a programmable output that can be configured as COR. That assumes >the station has the TTRC module and recent firmware [earlier versions >may not support the programmable I/O] > >Several other ways are described here: > >http://www.batlabs.com/msf5k.html > > > > > > >Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
