It was in service for about two week and then again last week end while we did a software up date to the Kenwood. It works just fine. It does not hear HT's as well as the Kenwood but it was a pile cheaper then the Kenwood. All in all we are happy with both 927 repeaters. BTW most folks are useing Maxtrac's with a 30 watt mobiles and EF high gain mobile ants. It is a must that you not use mag mounts on 927. Low loss coax is also a must. I hope this will be of help! 73 Russ.
----- Original Message ----- From: "Richard W. Solomon" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, July 08, 2004 10:50 AM Subject: RE: [Repeater-Builder] New Repeater in Ocean City NJ. > I would be interested in your experience with the Hamtronics repeater. > Has it been in service much ? > > Tnx es 73, Dick, W1KSZ > > -----Original Message----- > From: russ [mailto:[EMAIL PROTECTED] > Sent: Thursday, July 08, 2004 9:53 AM > To: [email protected] > Subject: Re: [Repeater-Builder] New Repeater in Ocean City NJ. > > > Hey Brent, > > We have two 927 MHz repeaters in Ocean City. The Main is a Kenwood TKR-901S > (NEW) and the Back up is a Hamtronics REP(also new). For the Amp we you > Crescend 80 watt out put with > a build in power supply. The duplexer is a 4 can TX/RX the isolator is > TX/RX the pre-amp is ARR The coax is 60' of 7/8 Comscope feeding a 10 DBD > TX/RX omni at 195' in the air a top a Hotel on the BD walk. All connectors > even jumpers are type "N" the repeater and controller are powered by a rack > mount Astron RM.-35 13.8 VDC power supply. The controller is a Link Comm > RLC-3 that is shared with the 147.285, 223.98 as well as the link to the net > work. We hope to have some pictures of the site soon as some one takes them. > If you would like a complete list of the network you can drop a note to > [EMAIL PROTECTED] and ask for it. > This list server as run by Kathy, AB2LF in NJ. She will send you back a list > of the net work and codes and PL's plus the freq's. > I hope the above will be of some help. > Very best of 73, > Russ, W3CH > Trustee, W3PS/RPT > > ----- Original Message ----- > From: "brent" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Wednesday, July 07, 2004 10:34 PM > Subject: Re: [Repeater-Builder] New Repeater in Ocean City NJ. > > > > Russ,, > > > > What kind of equipment are you using for the 902 repeater ? > > interested in the type of transmitter and receiver and duplexers you are > > using... > > thanks > > Brent > > http://www.qsl.net/kf4tnp > > > > ----- Original Message ----- > > From: "russ" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Cc: <[email protected]> > > Sent: Wednesday, July 07, 2004 4:50 PM > > Subject: [Repeater-Builder] New Repeater in Ocean City NJ. > > > > > > > > > > > > > Subject: New Repeater in Ocean City NJ. > > > > > > > > > > > > Hello All, > > > We now have our new 927 MHz repeater in service in Ocean City NJ. > > > All are most welcome to use the system! > > > The repeater is on 902.5375 input and the the out put is 927.5375 the > PL > > is > > > 156.7 the repeater has 80 watts of out put in to a TX/RX 10 DBD omni at > > 195' > > > right on the ocean and the BD walk. (on a hotel) > > > While visitting the NJ shore or most of south NJ please stop by for a > > > visit. > > > We are getting good reports from VA., MD., NYC., PA., and all over NJ. > > > > > > Very best of 73, > > > Russ, W3CH. > > > Trustee W3PS/RPT. > > > > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > --- > > > [This E-mail scanned for viruses at TNWEB LLC] > > > > > > > > > > > > > --- > > [This E-mail scanned for viruses at TNWEB LLC] > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
