You forgot the duck tape (g). All good information, and I do appreciate it. I got a copy of Part 95 sent to me last night, so I will read it today and decipher it, and take it from there. I've seen some good debates, and this one is definetly in there amongst them, so is the reason that I want to know, so I don't get that magical numbers of $7,500.00 or $11,000.00 if you know what I mean.
Mathew
Q <[EMAIL PROTECTED]> wrote:
Keep in mind that it is your license that is on the line and quite possibly the lives of others who may be put at risk when your kludged up illegal GMRS abortion wipes out some public service station. These are the same kind of people you see driving cars held together with plastic and bailing wire that gets someone hurt or killed. Get the proper equipment to do the job! Please stop recommending this mobile solution,its a bad idea all the way around....----- Original Message -----From: Kevin BednarSent: Sunday, July 11, 2004 10:01 PMSubject: RE: [Repeater-Builder] GMRS Repeater Info WantedAlso Matt, since GMRS is limited to 50 watts, you can use a mobile type duplexer, like a Celwave/RFS 633 series, which I've seen for less than $100 on ebay, and have even seen some around $50. If you can get the mobile radios cheap at a hamfest, and a mobile duplexer cheap, you could probably set up a GMRS machine for less than $200, including crystals, if you use a crystal type radio, since you already have an antenna and hardline.KevinK2KMB
From: Kevin Bednar [mailto:[EMAIL PROTECTED]
Sent: Sunday, July 11, 2004 9:54 PM
To: [email protected]
Subject: RE: [Repeater-Builder] GMRS Repeater Info WantedThere is nothing preventing you from using duplexed mobile gear like Micors or Mastr II's, or Motorola Maxtracs/Radius type radios as GMRS repeaters as long as the station ID'ing is handled properly.KevinK2KMB
From: Mathew Quaife [mailto:[EMAIL PROTECTED]
Sent: Sunday, July 11, 2004 9:28 PM
To: [email protected]
Subject: Re: [Repeater-Builder] GMRS Repeater Info WantedThanks Eric. License I Know is required. Issue that is at hand, I think you answered, is type of equipment allowed. I have read issues where guys are building them out of GE and Micor units, and that is what I want to know if this is allowed, or must it be certain types of equipment. Antenna and cable is already there, 7/8" Andrews and DB 8 Bay antenna, duplexer is something I will purchase after I decide on the repeater.Mathew
Before you can put a GMRS repeater on the air, you must have a GMRS
license. You also need to read and understand the applicable FCC Rules
in Title 47 USC Part 95. The current edition of Part 95 is dated
October 1, 2003.
A GMRS repeater should be FCC Type-Accepted for Part 95 operation, but
you can use a repeater that is Type-Accepted for Part 90. This
requirement rules out any repeaters built from parts. Some repeaters
that are relatively inexpensive include the Yaesu VXR-7000, the Kenwood
TKR-850, and the Motorola GR1225 or RKR1225. The important features to
have are a built-in ID-er and the capability to decode CTCSS or CDCSS.
You will quickly learn that a good antenna, duplexer, and feedline cost
more than the repeater.
Although the Part 95 Rules limit GMRS power to 50 watts, there are some
high-powered "pirate" stations operated by unlicensed individuals who
ignore all of the rules. I suggest that you not seek advice from such
people!
73, Eric Lemmon WB6FLY (and GMRS KAF4211)
w9mwq wrote:
>
> I have been looking into setting up a GMRS repeater for community
> access, and have been doing some reading on them. I am coming up
> with conflicting stories and need to know. What can be used as far
> as a repeater. I am told it has to be a certain type, then I read
> where they are building them out of spare parts, but then am told
> the spare parts units are not FCC approved. So what is the truth
> here? What can be used as a GMRS repeater? And what would be a low
> cost unit available for such use? Thanks.
>
> Mathew
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

