I have a UHF MastrII Tone Remote/Repeater that I want to convert to use
a CAT250 controller on. While I have a GE manual for the standard
repeater panel 19B234871P1 (GE LBI-31807), it is a long ways from the
station panel in this particular radio. The radio is a B3D100VAUUB. Does
anyone have info on the Tone Remote/Repeater station panel, or other
suggestions on converting to a more usual ham type controller?
Also, this radio has the GE programmable Channel Guard encoder and
decoder modules. I want to set this up such that the encoder follows the
RUS line, ie. the CG tone is only transmitted when there is a legal
signal on the RX input. Is there a jumper somewhere to accomplish this,
or will I need to implement this externally?
Thanks for any help.
Army Curtis, AE5P
Nacogdoches, the oldest town in Texas
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
