Hi and thanks for reading...
I have a UHF Mobile Micor that I just converted to
repeater service. However the PA deck only puts
out 10 watts and I'd like to see a little more
power than that.
I have an M57788M power module that is a 45 watt
power module and I would like to use that instead of
the stock PA deck for the micor.
I've looked at the schematic for the 220 power module
amp (on repeater builder.com) and it seems pretty simple
to do....except for one minor detail.
The module used in the 220 amp is an SAV15 in an H2
package and has four leads. The M57788M is in an H3A
package and has five leads.
Respectively, Vcc1 is A+, Vcc2 would be control, but
I don't know what Vcc3 would be.
So far, I have'nt been able to locate a data sheet online
that would help me figure out what Vcc3 would be used for.
Does anyone have some info that could help...???? A schematic
or data sheet...????
Thanks es 73's
Albert/WB7AWL
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
