I just put a backplane in the dishwasher ... it was dirty ... so? Neil
Kevin Bednar wrote: > > I would like to, but I don't think I have any of the backplanes > around right now. I'll have to check. I was hoping to make this > work, since I have another one being given to me to convert to 2 > meters, same type of system. If I can get one to work, the rest > are gravy. ;) > > Kevin > K2KMB > > -----Original Message----- > From: Neil McKie [mailto:[EMAIL PROTECTED] > Sent: Monday, August 02, 2004 4:01 PM > To: [email protected] > Subject: Re: [Repeater-Builder] Micor Base help > > The SP57 is a serious warning ... could mean almost anything knowing > Motorola. > > You might find it simpler to change out the mother board and the normally > available manuals will apply more easily. > > Neil > > Kevin Bednar wrote: > > > > The following numbers are all stamped across the top of the card cage > > on the PCB in the back: > > > > TLN5979A SP57 52958 > > > > The cards included the normal squelch, SCM, etc, as well as slots for > > a voter interface and encryption cards (this was an old govt system), > > all of which have been removed, except for the SCM which I know needs > > to be modified. Thanks. > > > > Kevin > > K2KMB > > > > -----Original Message----- > > From: Mike WA6ILQ [mailto:[EMAIL PROTECTED] > > Sent: Monday, August 02, 2004 3:13 PM > > To: [email protected] > > Subject: Re: [Repeater-Builder] Micor Base help > > > > At 11:38 AM 8/2/04, you wrote: > > > > >I'm working on a Micor VHF continous duty base, model C73RXB- > > >3106BT/C756ADSP. I want to modify this to use an external controller. > > >I have downloaded the info from rbtip for the Micor int. duty bases > > >and looked at that, but the backplane on the card cage on this model > > >is different, ie: some of the jumpers arent there or are in a > > >different place, etc. Anyone have any idea if following the mods for > > >the int base will work and just ignore the differences with regards > > >to the backplane, etc? Does anyone have proper mod info for this > > >model? TIA to all! > > > > > >Kevin > > >K2KMB > > > > What is the backplane number? > > > > To be on the safe side just post every three-letter-four-digit number > > you find on the backplane, and roughly where on the backplane you found > it. > > > > It would also help if you let us know what cards (name and number) you > > have in the card cage. The number helps because there were multiple > > versions of several of the modules... > > > > Mike WA6ILQ > > > > > > Yahoo! Groups Links > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
