Re: [Repeater-Builder] Need Hardline connectors!

[Chuck Kelsey]

Title: Message

John,   You may want to check with your local cable TV company. They may have some on hand and may be nice enough to core it for you. Never hurts to ask. Tell 'em you're with the TV station.   Chuck WB2EDV ----- Original Message ----- From: Jeff DePolo To: Repeater-Builder@yahoogroups.com Sent: Monday, August 16, 2004 6:42 PM Subject: RE: [Repeater-Builder] Need Hardline connectors! If it's really "625" (0.625" unjacketed, about 0.7" jacketed) 75 ohm aluminum smooth-wall "semiflex" cable TV distribution cable that you have, you want a BAFF connector which will give you type F female.  Check with Toner Cable (www.tonercable.com), North American Cable (www.northamericancable.com), et al.  You need a coring tool to do it right.  Maybe somebody in the CATV industry will pop up and offer you a few - I checked and I only have "500" series here.                                                               --- Jeff     -----Original Message----- From: John Clark [mailto:[EMAIL PROTECTED] Sent: Monday, August 16, 2004 6:16 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Need Hardline connectors! I need two connectors for 5/8-inch hardline. I would prefer BNC or "F" connectors for termination. (Will settle for anything) I have over 350 ft of excess cable that I will trade for connectors, if anyone is interested. The cable jacket says "1994 Commscope" on it. I am hoping for someone with extras, but any suggestions on where to purchase will be appreciated as well. Can this cable be buried under ground?   Thanks! John - KI4AWK WCTV 6 Television Engineering Tallahassee, FL (850) 893-6666 EXT 205 [EMAIL PROTECTED]     Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/   To unsubscribe from this group, send an email to: [EMAIL PROTECTED]   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.