I am installing a Comm Spec SS-32 encoder in a Micor
repeater. I am using a logic output from an S-Com 5K
controller to key the ground connection to the encoder
whenever the RX COR is active. I need to do this to
be able to link into another system.
My problem is when ever the encoder is keyed or
unkeyed, it causes the TX to drift off frequency about
+/- 900Hz. It apears that this is being casued by a cap
charging/discharging. I have tried several different
tone insertion points, always with the same result.
Has anyone else had this problem? Is there an
alternate way to hook up the PL encoder? TIA
and 73,
Kevin, K9HX
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
