Here is a comercial grade repeater 'box' that is "Plug and Play".
Also note the mounting of the radio chassis on the rack pannel, this
is for much better heat disapation. The GM/Radius/Maxtrac radios are
mounted with the heatsinks up. Remember, heat rises. There is room on
the back side of the 19" rack pannel for a mobile type duplexer and
maybe even the power supply.
That one pictured has a 10 amp DuraComm switcher and a Cellwave mobile
duplexer on the back side.
http://www.webimaging.com/echocomm/rptr_modules.html
They cost less than $100, and there is a version that includes a
CommSpec ID-8, Morse code identifier. about $180,(the ID-8 is $70)
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
