Over the weekend, I added a second UHF control receiver at one of the sites
I take care of. The control RX antenna is up about 150ft. Previous to
adding the new RX, I could easily access the first RX about 25 miles out.
Since adding the second RX, I can only access either one about 12-15 miles
out. I simply put a "tee" connector on the polyphaser and connected both
lines to it. Not the best engineering practice, but I have gotten away with
it before. Does anyone have an idea about how to properly match two
receivers to one antenna? The receivers are located in different racks in
different parts of the building. I know Motorola and GE had passive devices
to do this job. Is there a way to build something "homebrew" to do this
job? TIA, and 73,
Kevin, K9HX
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
