Considering replacing our UHF Hamtronics rx and tx with the Kenwood
TKR850. Two questions (at this point): Can the output be turned down
to 7-10 watts in the software; and should I be concerned about a
sensitivity rating of .35uv compared to a measured .18uv on the
Hamtronics? This is for the same quieting (12db). Or is it safe to
assume that in the real world the Hamtronics' sensitivity falls to
about .35uv with a stiff level of rf hitting it whereas the Kenwood
may hold steady at .35uv?
Thanks for the info!
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
