At 09:15 PM 9/26/04, you wrote:
>Hello.
>I just joined this group and am trying to find out some information
>on building repeaters.
>I have a IC-229H, repeater controller, duplexer and Neutec.
>My plans are to use the IC-229H as a receiver and the Neutec as the
>transmitter.
>My question is this:
>I have searched the web and haven't found any good info on using this
>radio as a receiver in a repeater.
>Icom was no help either - "I haven't done this with this radio, don't
>know of anyone who has."
>I know I need a COS signal and audio from the discriminator output.
>Can anyone tell me where to tap for those signals?
>
>Thanks in adavance.
>
>Heath Calhoun
>kb5vai
Feed the discriminator output into a RLC-MOT board.
It generates repeat audio and COS for you.
Read the "Mitrek Interfacing" article at www.repeater-builder.com
by clicking on the Motorola page then the Mitrek page.
Then skip down to the repeat audio output and the COS section.
Mike
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
