If you look at the schematics you will see that the data input has a low pass filter and you'll have horrible audio. We never had a problem using the proper audio inputs on these repeaters they sound very flat and natural. Make sure you have the drive levels in the proper range and are not cutting back on the input controls to the repeater.
Gregg R. Lengling, W9DHI, Retired Administrator http://www.milwaukeehdtv.org K2/100 S#3075 KX1 S# 57 Member: ARRL, RSGB, RCA, WERA and ORC -----Original Message----- From: Michael Singewald N1PLH [mailto:[EMAIL PROTECTED] Sent: Thursday, September 30, 2004 10:58 AM To: [email protected] Subject: [Repeater-Builder] Kenwood TKR850 external controller hookup I realize I can try both to see which I like, but I thought I would ask which audio inputs and outputs people are using on this repeater, audio or data? Looks like data input is designed for PL/DPL and may not work. I heard someone mention that the audio sounds thin on this repeater so I thought the data in might be better. Data output looks like it should work ok. Again, I assume that is discriminator audio and that is what I normally use anyway. Thanks for any advise...looking forward to interfacing this repeater. Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
